76 Processor
CAUTION: Ensure that the processor cover notch is positioned underneath the
alignment post.
5
When the processor is fully seated in the socket, close the processor cover.
6
Pivot the release lever down and place it under the tab on the
processor cover.
Postrequisites
1
Replace the processor fan and heat-sink assembly. See "Replacing the
Processor Fan and Heat-Sink Assembly" on page 71.
2
Replace the computer cover. See "Replacing the Computer Cover" on
page 19.
3
Follow the instructions in "After Working Inside Your Computer" on
page 11.
1 alignment post 2 tab 3 processor cover
4 release lever 5 processor 6 processor cover notch
book.book Page 76 Tuesday, April 17, 2012 11:37 AM
To Next Page
Loading...
