20 Fan Shroud
Procedure
1
Press in on the fan shroud and lift it to release the tabs that secure the fan
shroud to the processor fan and heat-sink assembly.
2
Lift the fan shroud and set it aside in a secure location.
Replacing the Fan Shroud
Procedure
1
Place the fan shroud over the processor fan and heat-sink assembly.
2
Gently press the fan shroud until the tabs on the fan shroud snap into
place.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 18.
2
Follow the instructions in "After Working Inside Your Computer" on
page 11.
1 processor fan and heat-sink assembly 2 fan shroud
book.book Page 20 Thursday, April 5, 2012 5:38 PM
To Next Page
Loading...
