Front I/O Panel 49
Replacing the Front I/O Panel
Procedure
1
Insert the front I/O panel clamps into the slots on the front panel.
2
Slide the front I/O panel toward the side. Ensure that the screw hole on
the front I/O panel aligns with the screw hole on the front panel.
3
Replace the screw that secures the front I/O panel to the front panel.
4
Route the front I/O panel cables through the routing guides on the chassis.
5
Connect the front I/O panel cables to the system-board connectors
(USBF1, USBF2, and AUDF1 ). See "System Board Components" on
page 15.
Postrequisites
1
Replace the PCI-Express x16 card, if applicable. See "Replacing the PCI-
Express Cards" on page 27.
2
Replace the drive cage. See "Replacing the Drive Cage" on page 39.
3
Replace the front bezel. See "Replacing the Front Bezel" on page 35.
4
Replace the fan shroud. See "Replacing the Fan Shroud" on page 20.
5
Replace the computer cover. See "Replacing the Computer Cover" on
page 18.
6
Follow the instructions in "After Working Inside Your Computer" on
page 11.
book.book Page 49 Thursday, April 5, 2012 5:38 PM
To Next Page
Loading...
