Dell Inspiron N4010 - Hinge Caps; Removing the Hinge Caps; Replacing the Hinge Caps

Great user manuals database on UserManuals.info

Hinge Caps

Removing the Hinge Caps

1. Follow the instructions in Before You Begin.

2. Remove the display assembly (see Removing the Display Assembly).

3. Remove the display bezel (see Removing the Display Bezel).

4. Remove the display panel (see Removing the Display Panel).

5. Remove the display hinges (see Removing the Display Hinges).

6. Press both sides of each hinge cap and lift the hinge caps out of the display hinges.

Replacing the Hinge Caps

1. Follow the instructions in Before You Begin.

2. Place the hinge caps on the display hinges and snap them into place.

3. Replace the display hinges (see Replacing the Display Hinges).

4. Replace the display panel (see Replacing the Display Panel).

5. Replace the display bezel (see Replacing the Display Bezel).

6. Replace the display assembly (see Replacing the Display Assembly).
Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1
hinge caps (2)
2
display hinges (2)