Replacing the Thermal Fan
1. Follow the instructions in Before You Begin.
2. Place the thermal fan on the computer base and replace the two screws.
3. Connect the I/O board cable and the thermal fan cable to the connectors on the system board.
4. Replace the palm rest (see Replacing the Palm Rest).
5. Replace the keyboard (see Replacing the Keyboard).
6. Replace the memory module(s) (see Replacing the Memory Module(s)).
7. Replace the module cover (see Replacing the Module Cover).
8. Follow the instructions from step 4 to step 5 in Replacing the Optical Drive.
9. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
To Next Page
Loading...
