15. Lift the system board assembly to disconnect the connector on the system board from the connector on the daughter board.
16. Turn the system board assembly over.
17. Follow the instructions from step 3 to step 5 in Removing the Hard Drive.
18. Remove the thermal cooling assembly (see Removing the Thermal Cooling Assembly).
19. Remove the processor module (see Removing the Processor Module).
Replacing the System Board
1. Follow the instructions in Before You Begin.
2. Replace the processor module (see Replacing the Processor Module).
3. Replace the thermal cooling assembly (see Replacing the Thermal Cooling Assembly).
4. Follow the instructions from step 4 to step 5 in Replacing the Hard Drive.
5. Turn the system board assembly over.
6. Align the connectors on the system board with the slots on the computer base.
7. Gently press the system board to connect the connector on the system board to the connector on the daughter board.
To Next Page
Loading...
