Dell Inspiron One 2205 - Solving Problems; Resolve Inspiron One Touch Screen Problems

Back to Contents Page
 Middle Frame
Dell™Inspiron™One2205ServiceManual
Removing the Middle Frame
Replacing the Middle Frame


Removing the Middle Frame

1. Follow the instructions in Before You Begin.

2. Remove the back cover (see Removing the Back Cover).

3. Follow the instructions from step 3 to step 5 in Removing the Optical Drive.

4. Follow the instructions from step 3 to step 7 in Removing the Front Stand.

5. Remove the rear stand cover (see Removing the Rear Stand Cover).

6. Remove the system-board shield (see Removing the System-Board Shield).

7. Disconnect the speaker cable from the connector (CN10) on the system board.

8. Make a note of the speaker cable routing and remove the cable from the routing guides.

9. Remove the cables from the routing guides on the middle frame.

10. Remove the 13 screws that secure the middle frame to the chassis.

11. Lift the middle frame at an angle toward the side of the computer and out of the chassis.

12. Remove the speaker (see Removing the Speakers).
Replacing the Middle Frame

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
middle frame
2
routing guide
3
screws (13)