Dell Latitude 3500 - Placa Do Botão de Energia

Passos seguintes
1. Volte a colocar a bateria
2. Volte a colocar a tampa da base
3. Volte a colocar a placa de memória SD
4. Siga o procedimento indicado em Após efetuar qualquer procedimento no interior do computador
Placa do botão de energia
Removing the power button board with optional fingerprint reader
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD memory card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the system fan.
6. Remove the display assembly.
Steps
1. Open the latch, and disconnect the power button board cable and fingerprint cable from the system [1].
2. Peel the conductive tape off the power button board [2].
70
Retirar e instalar componentes