Dell Latitude 3520 - Page 107

Table 8. System setup options—Storage menu (continued)
Storage
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, the SATA-1 option is enabled.
By default, the M.2 PCIe SSD-1 option is enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is disabled.
Drive Information
SATA-1
Type Displays the SATA type information of the system.
Device Displays the SATA device information of the system.
M.2 PCIe SSD-1
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
Enable Hard Drive Free Fall
Protection
Enable Hard Drive Free Fall Protection Allows you to enable Hard Drive Free Fall Protection feature.
By default, the Enable Hard Drive Free Fall Protection option is selected.
Enable MediaCard Enable or disable the media card in read-only state.
By default, the Secure Digital (SD) Card option is enabled.
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the system is running on
battery power.
Brightness on AC power Enable to set screen brightness when the system is running on
AC power.
Touchscreen Enable or disable touchscreen for the operating system.
Touchscreen will always work in the BIOS setup irrespective
of this setting. This option is enabled by default.
EcoPower
Enable EcoPower Enable or disabled EcoPower feature. This option is enabled by
default.
Full Screen Logo Enable or disable full screen logo.
By default, the option is disabled.
Table 10. System setup options—Connection menu
Connection
Network Controller Configuration
BIOS setup 107