ePSA User Interface
This section contains information on ePSA 3.0’s Basic and Advanced Screen.
ePSA opens basic screen on start. You can switch to advanced screen using the arrow icon on the bottom. Advanced screen shows
detected devices on the left column. Specific test can be included or excluded only in the interactive mode.
ePSA Basic Screen
The Basic Screen has minimal controls which allows easy navigation for user to start or stop the diagnostic.
LCD Test
The ePSA starts with LCD pixel test, where color bars are displayed on the screen. Check for any flaws with pixels on the screen
• Dead Pixels: Black dot
• Bright Pixels: Bright dot
110
Tõrkeotsing
To Next Page
Loading...
