Next steps
1. Replace the battery
2. Replace the base cover
3. Replace the SIM card tray
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
Jahutusradiaator
Removing the heatsink
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Remove the battery
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink away from the system board [2].
Komponentide eemaldamine ja paigaldamine
45
To Next Page
Loading...
