Nööppatarei
Removing the coin-cell
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Remove the battery
6. Remove the memory module
7. Remove the WWAN card
8. Remove the WLAN card
9. Remove the M.2 SSD
10. Remove the system fan
11. Remove the heatsink
12. Remove the power-adapter port
13. Remove the system board
Steps
Turn the system board and disconnect the coin cell battery cable from the connector on the system board.
Installing the coin-cell
Steps
Turn the system board and connect the coin cell battery cable to the connector on the system board.
68
Komponentide eemaldamine ja paigaldamine
To Next Page
Loading...
