Dell Latitude 5300 2-in-1 Chrome - Touchpad Button Board Removal and Installation

Next steps
1. Replace the battery
2. Replace the base cover
3. Replace the SIM card tray
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
Puuteplaadi nupupaneel
Removing the touchpad button board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Remove the battery
6. Remove the LED board
Steps
1. Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board.
2. Remove the two (M2x3) screws that secure the touchpad button bracket to the palmrest [1].
3. Lift the touchpad button board bracket away from the computer [2].
56
Komponentide eemaldamine ja paigaldamine