Next steps
1. Connect the battery cable.
2. Replace the base cover.
3. Replace the SIM card tray.
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
WLAN-kaart
Removing the WLAN card
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Disconnect the battery cable
Steps
1. Loosen the single (M2x2) screw that secures the WLAN card bracket to the system board [1].
2. Remove the WLAN card bracket with screw that secures the WLAN antenna cables [2].
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4. Slide and lift the WLAN card away from the connector on the system board [4].
30
Komponentide eemaldamine ja paigaldamine
To Next Page
Loading...
