Installing the WLAN card
About this task
CAUTION: To avoid damage to the WLAN card, do not place any cables under it.
Steps
1. Insert the WLAN card into the connector on the system board [1].
2. Connect the WLAN antenna cables to the connectors on the WLAN card [2].
3. Place the WLAN card bracket with screw to secure the WLAN antenna cables to the WLAN card [3].
4. Tighten the single (M2x3) captive screw to secure the WLAN card bracket to the WLAN card [4].
Komponentide eemaldamine ja paigaldamine
31
To Next Page
Loading...
