Figure 6. Event Logs
To run test on specific device or run a specific test
1. To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.
2. Select the device from the left pane and click Run Tests or use Advanced Option to include or exclude any Test.
ePSA Error Messages
When the Dell ePSA Diagnostic detects an error while running, it will pause the test and then popup a window as shown below :
NOTE: If all the test passes you get a QR code to show the test results.
• By responding to Yes, the diagnostic will continue testing the next device and the error details will be available in the summary report.
• By responding to No, the diagnostic will stop testing the remaining untested device.
Tõrkeotsing
113
To Next Page
Loading...
