Installing the heatsink
Steps
1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].
Next steps
1. Replace the battery
2. Replace the base cover
3. Replace the SIM card tray
4. Replace the microSD card.
5. Follow the procedure in after working inside your computer.
Power-adapter port
Removing the power adapter port
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray
4. Remove the base cover
5. Remove the battery
44
Removing and installing components
To Next Page
Loading...
