2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the heatsink.
7. Remove the memory module.
8. Remove the system fan.
9. Remove the DC-in .
10. Remove the WLAN card.
11. Remove the WWAN card.
12. Remove the system board.
13. Remove the SSD
Steps
Turn the system board and disconnect the coin cell battery cable from the connector on the system board.
Installing the coin-cell battery
Steps
Turn the system board and connect the coin cell battery cable to the connector on the system board.
Disassembly and reassembly
71