Smart card reader board
Removing the smart card reader board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the memory module.
7. Remove the system fan.
8. Remove the DC-in .
9. Remove the WLAN card.
10. Remove the WWAN card.
11. Remove the system board.
12. Remove the coin cell battery.
13. Remove the SSD
14. Remove the keyboard.
Steps
1. Unroute the smart card reader board cable.
2. Remove the two (M2x2.5) screws that secure the smart card reader to the palmrest [1].
3. Lift the smart card reader board away from the computer [2].
Disassembly and reassembly
87
To Next Page
Loading...
