Steps
1. Align the screw holes on hard drive with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x4) that secure the hard drive to the computer.
3. Connect the hard drive cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Install the SIM tray.
4. Follow the procedure in After working inside your computer.
Hard drive
Removing the hard-drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
Removing and installing components
41
To Next Page
Loading...
