Removing the display assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. WLAN
d. WWAN
3. To remove the display hinge brackets:
a. Remove the screw that secures the display hinge bracket to the computer [1].
b. Remove the display hinge bracket from the computer [2].
c. Remove the screws that secure the display assembly to the computer [3].
4. To disconnect display cable and remove the display assembly:
a. Remove the screw that secures the display cable bracket to the computer [1].
b. Remove the display cable bracket to access the display cable [2].
c. Disconnect the display cable from the system board [3].
d. Release the antenna cables and display cable from the routing channel [4].
e. Remove the screws that secure the display assembly and lift the display assembly to remove it
from the computer [5].
20
To Next Page
Loading...
