Using Your Projector 15
4 Right / Auto Adjust Press to adjust the OSD setting.
Press to synchronize the projector to the input
source. Auto Adjust does not operate if the
onscreen display (OSD) is displayed.
5 Menu Press to activate the OSD. Use the directional keys
and the Menu button to navigate through the
OSD.
6 Down / Keystone
adjustment
Press to select the OSD items.
Press to adjust image distortion caused by tilting
the projector. (±20 degrees).
7 Power Turn the projector on and off. For more
information, see "Turning Your Projector On" on
page 11 and "Turning Your Projector Off" on
page 11.
8 Left / Source Press to adjust the OSD setting.
Press to toggle through Analog RGB and Composite
sources when multiple sources are connected to the
projector.
9 Enter Press to confirm the selection item.
Downloaded from ProjectorsManual.com Manuals
To Next Page
Loading...
