Dell Mobile M115HD - Page 31

TRACKING— Synchronize the phase of the display signal with the
graphic card. If you experience an unstable or flickering image,
use the Tracking to correct it. This is a fine adjustment.
ASPECT RATIO— Allows you to select the aspect ratio to adjust
how the image appears. Options are: Origin, 16:10, and 4:3.
• Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
• 4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z
OOM— Press and to zoom and view the image.
ZOOM NAVIGATION—Press to activate the Zoom
Navigation
menu.
Use to navigate the projection
screen.
DISPLAY SETTINGS (IN VIDEO MODE)—Select and press to activate dis-
play settings. The display settings menu provides the following options:
A
SPECT RATIO— Allows you to select the aspect ratio to adjust
how the image appears. Options are: Origin, 16:10, and 4:3.
• Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
• 16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
• 4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z
OOM— Press and to zoom and view the image.
Using Your Projector 31