Dell OptiPlex 210L - Page 106

Back to Contents Page
Dell™OptiPlex™210LUser'sGuide
Drives
Drives
Your computer supports:
l One serial ATA hard drive
l One optional ATA hard drive
l One optional floppy drive
l One optional CD or DVD drive

General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the system board. Serial ATA hard drives should be connected to the connectors labeled "SATA0" or
"SATA2" on the system board.

Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a data cable—to the back of the drive and to the system board.

Drive Interface Connectors
1
CD/DVD drive
2
floppy drive
3
hard drive

IDE Drive Connector

Serial ATA Connector
1
colored stripe on IDE cable
2
interface cable connector
3
interface connector