Dell OptiPlex 3010 Small Form Factor User Manual

Removing the Front Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Pry the front bezel retention clips away from the chassis.
4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
Related Links
Installing the Front Bezel
Installing The Front Bezel
1. Insert the four hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Rotate the bezel toward the computer to engage the front bezel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing The Front Bezel
Removing the Expansion Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Remove the front bezel.
4. Rotate the release tab on the card-retention latch upward.
10

Dell OptiPlex 3010 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 3010 Small Form Factor
Category	Desktop
Language	English