Dell OptiPlex 3010 Small Form Factor - Component Replacement Procedures; Cover Removal and Installation

2
 












  
Removing the Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Pull up the cover-release latch at the side of the computer.
3. Lift the cover upward to a 45–degree angle and remove it from the computer.
Related Links
Installing the Cover
Installing The Cover
1. Place the computer cover on the chassis.
2. Press down on the computer cover, until it clicks into place.
3. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Cover
9