Next steps
1. Install the speakers.
2. Install the rear-I/O bracket.
3. Install the bottom cover.
4. Install the wireless card.
5. Install the system-board shield.
6. Install the back cover.
7. Install the cable cover (optional).
8. Install the stand.
9. Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the cable cover (optional).
4. Remove the back cover.
5. Remove the system-board shield.
6. Remove the hard drive.
7. Remove the bottom cover.
8. Remove the rear-I/O bracket.
9. Remove the speakers.
10. Remove the camera assembly.
11. Remove the system board.
12. Remove the PSU.
13. Remove the PSU fan.
About this task
The following image indicates the location of the display panel and provides a visual representation of the display panel removal
procedure.
78
Removing and installing components
To Next Page
Loading...
