Dell OptiPlex 580 - Detailed Engineering Specifications; Physical Dimensions and Weight; Shipping and Packaging; System Board Connector Dimensions

OptiPlex580TechnicalGuidebook Page19
Detailed Engineering Specifications
System Dimensions (Physical)
NOTE: System Weight* and Shipping Weight* is based on a typical configuration and may vary based on PC configuration. A
typical configuration includes: integrated graphics, one hard drive, one optical drive, and one diskette drive.
MT DT SFF
Chassis Volume liters 32.62 15.08 8.00
Chassis Weight*1 pounds/kilograms
25.3 / 11.6
16.5 / 7.26
13 / 5.90
Chassis Dimensions: (HxWxD)
Height inches/centimeters
15.8 / 40.8 4.4 / 11.4 3.5 / 9.26
Width inches/centimeters
7.4 / 18.7 15.4 / 39.9 11.8 / 31.4
Depth inches/centimeters
17.2 / 43.3 13.7 / 35.3 12.9 / 34
Shipping Weight*1 pounds/kilograms includes packaging materials
43.5 / 19.73
28.0 / 12.7
11.25/ 28.6
Packaging Parameters (HxWxD)2
Height inches/centimeters
22.06/ 56.0 20.35/ 51.7 20.75/ 52.7
Width inches/centimeters
20.94/ 53.2 20.04/ 50.9 16.38/ 41.6
Depth inches/centimeters
14.56/ 37.0 11.96/ 30.4 11.25/ 28.6
1 Weights are approximates and may change based on system configuration and included accessories.
2 Dimensions are DAO specific. Each region has unique packing.
System Board Connector Maximum Allowable Dimensions
MT DT SFF
PCI Slot(s) Dimensions: (HxL) 2 1 0
Height inches/centimeters 4.376/11.115 2.731/6.89
Length inches/centimeters 6.6/16.765* 6.6/16.765
PCIe x16 Slot Dimensions: (HxL) 1 1 1
Height inches/centimeters 4.376/11.115 2.731/6.89