Dell OptiPlex 7040 - Updating the BIOS; BIOS Update Procedure

Option Description
• DNS (Default)
Server Name Allows you to specify the name of the server
Server IP Address Specifies the primary static IP address of the cloud desktop server. The
default IP address is 255.255.255.255
Server port Specifies the primary port of the cloud desktop. The default setting is 06910.
Client Address Method Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Client IP address Specifies the static IP address of the client. The default IP address is
255.255.255.255
Client Subnet Mask Specifies the subnet mask address of the client. The default IP address is
255.255.255.255
Client Gateway Specifies the gateway address of the client. The default IP address is
255.255.255.255
DNS IP Address Specifies the DNS IP address of the client. The default IP address is
255.255.255.255
Domain Name Specifies the domain name of the client.
Advanced Allows you to turn on the Verbose mode for advanced debugging. This
option is disabled by default.
Table 17. System logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Table 18. Advanced configurations
Option Description
ASPM Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
Updating the BIOS
It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1. Restart the computer.
2. Go to Dell.com/support.
47