Option Description
• WLAN Only - Allows the system to be powered on by special WLAN signals.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by
default.
Intel Ready Mode Allows you to enable the capability of Intel Ready Mode Technology. This option is disabled by
default.
Table 13. POST Behavior
Option Description
Adapter Warning Allows you to choose whether the system displays warning messages when you use certain
power adapters. This option is enabled by default.
Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should be enabled when the system
boots. This option is enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. This
option is enabled by default.
Fast Boot This option can speed up the boot process by bypassing some compatibility steps:
• Minimal — The system boots quickly, unless the BIOS has been updated, memory changed,
or the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Table 14. Virtualization Support
Option Description
Virtualization This option species whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel® Virtualization Technology. Enable Intel Virtualization
Technology - This option is disabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel® Virtualization technology for direct I/O. Enable Intel
Virtualization Technology for Direct I/O - This option is disabled by default.
Trusted Execution This option species whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Technology. This option
is disabled by default.
Table 15. Wireless
Option Description
Wireless Device Enable Allows you to enable or disable the internal wireless devices. All the options are enabled by
default.
Table 16. Maintenance
Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set
by default.
30
To Next Page
Loading...
