Dell OptiPlex 7040M - Page 31

Option Description
SERR Messages Controls the SERR message mechanism. This option is not set by default. Some graphics cards
require that the SERR message mechanism be disabled.
BIOS Downgrade Allows you to control ashing of the system rmware to the previous versions. This option is
enabled by default.
NOTE: If this option is not selected, the ashing of the system rmware to the previous
versions is blocked.
Data Wipe Allows you to securely erase the data from all the available internal storages, such as HDD, SSD,
mSATA, and eMMC. This option is disabled by default.
BIOS recovery Allows you to recover the corrupted BIOS conditions from the recovery les on the primary hard
drive or an external USB key.
Table 17. Cloud Desktop
Option Description
Server Lookup Method Allows you to specify how the cloud desktop software will lookup server addresses.
• Static
• DNS (Default)
Server Name Allows you to specify the name of the server
Server IP Address Species the primary static IP address of the cloud desktop server. The default IP address is
255.255.255.255
Server port Species the primary port of the cloud desktop. The default setting is 06910.
Client Address Method Species how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Client IP address Species the static IP address of the client. The default IP address is 255.255.255.255
Client Subnet Mask Species the subnet mask address of the client. The default IP address is 255.255.255.255
Client Gateway Species the gateway address of the client. The default IP address is 255.255.255.255
DNS IP Address Species the DNS IP address of the client. The default IP address is 255.255.255.255
Domain Name Species the domain name of the client.
Advanced Allows you to turn on the Verbose mode for advanced debugging. This option is disabled by
default.
Table 18. System Logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Table 19. Advanced congurations
Option Description
ASPM Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
31