Dell OPTIPLEX 740 - Installing a Pci Express X16 Card or DVI Card

Installing a PCI Express x16 Card or DVI Card

1. Follow the procedures in Before You Begin.

2. Gently lift the release tab on the card retention latch from the inside and pivot the latch open.

3. If you are installing a new PCI Express x16 card or DVI card, remove the filler bracket to create a card- slot opening. Then continue with step 5.

4. If you are replacing a PCI Express x16 card or DVI card, remove the card (see Removing a PCI Express x16 Card or DVI Card). If necessary, disconnect
any cables connected to the card. Then continue with step6.

5. Prepare the card for installation.


6. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
NOTE: For PCI card locations, see System Board Components.
CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be
sure to unplug your computer from its electrical outlet before installing any cards.
NOTE: See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your
computer.
1
PCI Express x16 card
2
PCI Express x16 card connector
1
PCI Express x16 DVI-card
2
DVI card connector
3
PCI Express x16 card connector