Dell OptiPlex 9020 - System Setup Options

Dell - Internal Use - Confidential
32 Room for text | Dell Inc., 2014
Architecture
power state
Specification
Revision 1.1
Integrated Memory
Yes
Data Transfer Mode
(example: Bus-Master
DMA)
Yes
Power Consumption
(full operation per data
rate connection speed)
535mW (Max)
535mW (Max.)
Power Consumption
(standby operation)
176mW (Max)
45mW (Max.)
IEEE Standards
Compliance
802.3
802.3
Hardware
Certifications
n/a
N/A
Boot ROM Support
EEPROM (located in SPI)
N/A
Network Transfer Mode
Network
Transfer Rate
10BASE-T (full-duplex)
20 Mbps
100BASE-TX (half-
duplex) 100 Mbps
100BASE-TX (full-
duplex) 200 Mbps
1000BASE-T (full-
duplex) 2000 Mbps
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
10 Mb (full/half-
duplex)
100 Mb
(full/half-duplex)
1000 Mb (full-
duplex)
Environmental
Operating
Temperature
0° C to 85° C (32° F to 185° F)
0° C to 70° C
Operating Humidity
20% to 80% (non-condensing)
IC level 40~60%
RH
PCB level 0~90%
RH
Operating System
Driver Support
Windows 8.1 64, Windows 8 32/64, Windows 7 32/64
Windows 7
32/64, Windows
8.1 /64
Ubuntu
Manageability
WOL, PXE 2.1
WOL, PXE 2.1
Management
Capabilities Alerting
Intel® Standard Manageability, Intel Core 2 Duo/
Quad Processor with vPro Technology
N/A
1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission,
connection to a Gigabit Ethernet server and network infrastructure is required.
Communications – Network Adapter
Broadcom NetXtreme
10/100/1000 PCIe
Gigabit1 Networking
MT
SFF
USFF
Micro