Dell OPTIPLEX XE Series - System Board Connectors and Slots; PCI and PCIe Slot Specifications; Graphics and Video Controller; External Ports and Connectors

DELL™ OPTIPLEX™ XE TECHNICAL GUIDEBOOK V1.0
10
DT SFF
Integrated Intel GMA 4500
Integrated on system board
Enhanced Graphic/Video Options
DVI (Digital) Adapter Card Optional card
SYSTEM BOARD CONNECTORS
NOTE: See Detailed Engineering Specifications for maximum card dimensions.
GRAPHICS/VIDEO CONTROLLER
NOTE: DT supports low profile card or full height card with optional combo riser. SFF supports low profile
DT SFF
PCI Slot(s): number of
2 1
PCIe x16 Slot: number of
1 1
PCIe x1 Slot: number of
1 0
Serial ATA (SATA)
3 3
See chassis diagrams section for port/connector locations
DT SFF
USB 2.0
2 Front, 4 Rear, 2 Internal
24V Powered USB 2.0
1 Rear
Serial
2 rear with option for powered
Network Connector (RJ-45)
2 Rear
PS/2
2 Rear
Wireless
Optional via add-in card
Routing for external power
1 Front
Video:
VGA 1 Rear
DVI-D Optional via add-in card or DP-to-DVI adapter
DisplayPort 1 Rear
Audio:
Line in/microphone 1 Rear
Line out 1 Rear
Risers: (replaces PCI slot and 1 PCIe slot on DT system board)
Combo full height riser with 1 PCI and 1 PCIe x16 connector X
Dual full height riser with 2 PCI connectors X
EXTERNAL PORTS/CONNECTORS
NOTE: DT supports low profile card or full height card with optional riser. SFF supports low profile card.