Dell OPTIPLEX XE Series - BIOS Default Settings - Core Configuration; Drive and System Configuration Defaults; Video and Performance Defaults; Virtualization and Security Defaults

DELL™ OPTIPLEX™ XE TECHNICAL GUIDEBOOK V1.0
30
BIOS DEFAULTS
Drives
Diskette drive: USB
SATA Operation; RAID On
SMART Reporting: Disable
SATA-0: Enable
SATA-1: Enable
System Configuration
Integrated NIC: Enable
USB Controller: Enable
Serial Port #1: Auto
Serial Port #2: Auto
Front USB: Enable
Rear Dual USB (Under NIC1) and Powered
USB: Enable
Rear Dual USB (Under NIC2): Enable
PCI Slots: Enable
WIFI NIC Slot: Enable
Audio: Enable
Video
Primary Video: Auto
Performance
Multiple CPU Core: Enable
Intel® SpeedStep™:
Disable, unless the customer purchased a
SpeedStep™ capable processor.
C States Control: Enable
Limit CPUID Value: Disable
Virtualization Support
Virtualization: Enable
VT for Direct I/O: Disable
Security
Administrator Password: Not set
System Password: Not set
Password Changes: Enable
CPU XD Support: Enable
Computrace®: Deactivate
SATA-0 Password: Not set