Dell OptiPlex XE3 Small Form Factor User Manual

Table 8. System Configuration(continued)
Option Description
● Enable Audio
● Enable Internal Speaker
The options are selected by default.
Miscellaneous Devices Allows you to enable or disable the Miscellaneous Devices. The option are
● Enable Secure Digital (SD) Card (Enabled by default)
● Secure Digital (SD) Card Read-Only mode
Dust Filter Maintenance Allows you to set reminder for Dust filter maintenance with options for 15 Days to 180 Days
Table 9. Video
Option Description
Multi-Display The option is selected by default.
Primary Display Allows you to select the primary display when multiple controllers are available in the system.
● Auto (default)
● Integrated Graphics
NOTE: If you do not select Auto, the on-board graphics device will be present and
enabled.
Table 10. Security
Option Description
Admin Password Allows you to set, change, and delete the admin password.
System Password Allows you to set, change, and delete the system password.
Internal HDD-0 Password Allows you to set, change, and delete the computer’s internal HDD.
Internal HDD-1 Password Allows you to set, change, and delete the computer’s internal HDD.
Internal HDD-2 Password Allows you to set, change, and delete the computer’s internal HDD.
Strong Password This option lets you enable or disable strong passwords for the system.
Password Configuration Allows you to control the minimum and maximum number of characters allowed for a
administrative password and the system password. The range of characters is between 4
and 32.
Password Change This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
UEFI Capsule Firmware
Updates
This option controls whether this system allows BIOS updates via UEFI capsule update
packages. This option is selected by default. Disabling this option will block BIOS updates
from services such as Microsoft Windows Update and Linux Vendor Firmware Service
(LVFS)
TPM 2.0 Security Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating
system.
● TPM On (default)
○ PPI Bypass for Enable Commands
○ PPI Bypass for Disable Commands
○ PPI Bypass for Clear Commands
○ Attestation Enable (default)
○ Key Storage Enable (default)
○ SHA-256 (default)
● Clear
● TPM State
64 System setup

Dell OptiPlex XE3 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex XE3 Small Form Factor
Category	Desktop
Language	English