About this task
The following image indicates the palm-rest assembly and provides a visual representation of the installation procedure.
Steps
Place the palm-rest assembly on a flat surface.
NOTE:
If you are installing components to a new palm-rest assembly, use the power-button and fingerprint reader bracket
from the previous palm-rest assembly.
Next steps
1. Install the keyboard assembly.
2. Install the system board .
3. Install the speakers.
4. Install the display assembly.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
36
Removing and installing components
To Next Page
Loading...
