Table 5. System setup options—System Configuration menu (continued)
System Configuration
Port Enablement Enables the selected onboard drives.
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Drive Information Displays the information of various onboard drives.
Enable Audio Enables or disables all integrated audio controller.
Default: ON.
Enable Microphone Enables or disables microphone.
Default: ON.
Enable Internal Speaker Enables or disables internal speaker.
Default: ON.
USB Configuration
Enable Boot Support Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
Default: ON.
Enable External USB Ports Enables or disables USB ports to be functional in an operating system
environment.
Default: ON.
Enable Thunderbolt Technology Support Enables or disables Thunderbolt Technology Support.
Default: ON.
Enable Thunderbolt Boot Support Enables or disables Thunderbolt Boot Support.
Default: OFF.
Miscellaneous Devices Enables or disables various onboard devices.
Enable Camera Enables or disables the camera.
Default: ON.
Touchscreen Enables or disables the touchscreen for the operating system.
NOTE: Touchscreen will always work in the BIOS setup irrespective of this
setting.
Default: ON.
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
Default: ON.
Enable Fingerprint Reader Single Sign On Enables or disables the Fingerprint Reader Device's Single Sign On capability.
Default: ON.
Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only
state.
Default: Enable Secure Digital (SD) Card.
Keyboard Illumination Configures the operating mode of the keyboard illumination feature.
Default: Bright. Enable the keyboard illumination feature at 100% brightness
level.
System setup 41
To Next Page
Loading...
