Label Description Use
1 VESA mounting holes (100
mm)
To mount the monitor.
2 Regulatory rating label Lists the regulatory approvals.
3 Security lock slot
Use a security lock to secure your
monitor. (security lock not included).
4 Barcode serial number label Refer to this label if you need to contact
Dell for technical support.
5 Stand release button Release stand from monitor.
6 USB downstream port Connect your USB device. You can
only use this connector after you
have connected the USB cable to the
computer and USB upstream connector
on the monitor.
7 Cable management slot Use to organize cables by placing them
through the slot.
Side View
About Your Monitor 13
To Next Page
