Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a
component.
NOTE: Screw color may vary with the conguration ordered.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Base cover Palm-rest and keyboard
assembly
M2x7 6
Battery Palm-rest and keyboard
assembly
M2x3 2
Hard-drive assembly Palm-rest and keyboard
assembly
M2x3 3
Hard-drive bracket Hard drive M3x3 4
Solid-state drive Palm-rest and keyboard
assembly
M2x3 1
I/O board Palm-rest and keyboard
assembly
M2x3 2
Fan Palm-rest and keyboard
assembly
M2x3 2
Wireless card System board M2x3 1
Power button with
ngerprint reader (Only on
computers shipped with
nger print reader)
Palm-rest and keyboard
assembly
M2x2.5 2
Power-adapter port Palm-rest and keyboard
assembly
M2x3 1
Power button Palm-rest and keyboard
assembly
M2x2.5 2
USB Type-C bracket System board M2x3 2
System board Palm-rest and keyboard
assembly
M2x2 Big Head 5
5
Screw list 13
To Next Page
Loading...
