To Next Page

To Previous Page

Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or

4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware

Page 16

Boot Menu 5.1.9.3

CPU Card ID: 0x10508541

/DskVol// - disk check in progress ...

/DskVol// - Volume is OK

volume descriptor ptr (pVolDesc): 0x81239b0

XBD device block I/O handle: 0x10001

auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2

volume write mode: copyback (DOS_WRITE)

volume options:

max # of simultaneously open files: 52

file descriptors in use: 0

# of different files in use: 0

# of descriptors for deleted files: 0

# of obsolete descriptors: 0

current volume configuration:

- volume label: NO LABEL ; (in boot sector: )

- volume Id: 0x167

- total number of sectors: 61,376

- bytes per sector: 512

- # of sectors per cluster: 4

- # of reserved sectors: 1

- FAT entry size: FAT16

- # of sectors per FAT copy: 60

- # of FAT table copies: 2

- # of hidden sectors: 4

- first cluster is in sector # 136

- Update last access date for open-read-close = FALSE

Boot Menu 5.1.9.3

Select an option. If no selection in 10 seconds then

operational code will start.

1 - Start operational code.

2 - Start Boot Menu.

Select (1, 2):

Operational Code Date: Wed Apr 1 16:01:49 2015

Uncompressing.....

Adding 0 symbols for standalone.

/DskVol// - disk check in progress ...

dosChkLib : CLOCK_REALTIME is being reset to THU AUG 03 20:31:48 2006

Value obtained from file system volume descriptor pointer: 0x3d4a9f0

The old setting was THU JAN 01 00:00:03 1970

Accepted system dates are greater than THU DEC 27 00:00:00 1990

/DskVol// - Volume is OK

volume descriptor ptr (pVolDesc): 0x3d4a9f0