Dell PowerConnect 8024 Release Notes

PowerConnect 8024/8024F Release Notes
System Firmware Version 3.1.4.16 Page 3
Introduction
This document provides specific information for the Dell PowerConnect 8024/8024F switches, firmware version 3.1.4.16.
It is recommended that this release note be thoroughly reviewed prior to installing or upgrading of this product.
Global Support
For information regarding the latest available firmware, release note revisions, or additional assistance, please visit the Support
Web Site
http://support.dell.com/.
Firmware Specifications
Firmware Version Details
Boot PROM Name Version No. Release Date
Not Applicable 3.1.4.16 March 2011
Firmware Image Name Version No. Release Date
PC8024v3.1.4.16 3.1.4.16 March 2011
Version Numbering Convention
Version number
Description
PC8024/PC8024F
3 1 4 16
Four part version number

Denotes the build number.

Denotes an ad hoc release of the product software.

Denotes a scheduled maintenance release of the product software.

Denotes a major version number.
Supported Firmware Functionality
For more details regarding the functionalities listed, please refer to the Dell™ PowerConnect™ PC8024/PC8024F Switches CLI
Reference Guide and the Dell™ PowerConnect™ PC8024/PC8024F Switches Configuration Guide.
Hardware Supported
PowerConnect 8024F
PowerConnect 8024

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries