Dell POWEREDGE 1900 - Opening and Closing the System; Removing the Bezel

46 Installing System Components
Opening and Closing the System
The system is enclosed by a bezel and cover. To upgrade or troubleshoot the system, remove the bezel
and cover to access the drives and internal system components.
Removing the Bezel
1 Unlock the keylock at the right side of the bezel. See Figure 3-2 .
2
While grasping the bezel, push the release latch on top of bezel to the left.
3 Rotate the top of the bezel away from the front panel.
4 Unhook the bottom of the bezel and pull the bezel away from the system. See Figure 3-2 .