Dell POWEREDGE 4300 - Choose a Language; Configure the System; Create Diskettes

2-8 Dell PowerEdge 4300 Systems User’s Guide
NOTE: The options displayed on your system are dependent on your system configu-
ration and may not include all of those listed here.
7DEOH8WLOLW\3DUWLWLRQ0HQX2SWLRQV
2SWLRQ 'HVFULSWLRQ
Choose a language:
Deutsch, English,
Español, Français
Allows the user to select the language in which
menus and messages are displayed.
Configure the system:
Run Resource Con-
figuration Utility
Runs the RCU.
Configure RAID
Subsystem
Runs the RAID controller configuration utility if the
controller card is present on your system.
Run system utilities:
Run System
Diagnostics
Runs the system hardware diagnostics.
Upgrade Utility
Partition
Allows the user to upgrade the utility partition (for
example, add, remove, or change features installed
on the partition).
Create diskettes:
Create blank, format-
ted diskette
Creates a blank, formatted diskette.
Create utility and
diagnostics
diskettes:
Create Resource
Configuration Util-
ity diskette
Creates a bootable diskette for running the RCU.
The RCU detects expansion cards and slots,
enabling automatic configuration.
Create RAID con-
figuration utility
diskette
Creates a bootable diskette for running the RAID
controller configuration utility (if the controller card
is present on your system). The RAID configuration
utility provides an alternative method for configuring
the card.
Create diagnostics
diskette
Creates a bootable diskette from which the hard-
ware diagnostics can be run.
Create system
utility diskette
Creates a bootable diskette from which utilities,
such as the Asset Tag utility, can be run.
33255bk0.book Page 8 Tuesday, August 25, 1998 8:46 AM