EasyManua.ls Logo

Dell PowerEdge 860 - Diagnostics Indicator Codes

Dell PowerEdge 860
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 About Your System
Diagnostics Indicator Codes
The four diagnostics indicators on the system front panel display error codes during system startup.
Table 1-5 lists the causes and possible corrective actions associated with these codes.
Write fault
Write fault on selected
drive
Faulty diskette, diskette drive, hard
drive.
Replace the diskette. Ensure that the
diskette drive and hard-drive cables are
properly connected. See
"Troubleshooting a USB Device" on
page 83, "Troubleshooting a Hard Drive"
on page 90, or "Troubleshooting a Hard
Drive" on page 90 for the appropriate
drive(s) installed in your system.
Table 1-4. System Messages (continued)
Message Causes Corrective Actions
Table 1-5. Diagnostic Indicator Codes
Code Causes Corrective Action
Possible processor failure. See "Troubleshooting the Microprocessor" on
page 92.
Memory failure. See "Troubleshooting System Memory" on
page 88.
Possible expansion card
failure.
See "Troubleshooting Expansion Cards" on
page 91.
Possible video card
failure.
See "Troubleshooting Expansion Cards" on
page 91.
A B C D
A B C D
A B C D
A B C D
= yellow
= green
= off

Table of Contents

Other manuals for Dell PowerEdge 860

Related product manuals