Dell PowerEdge H730P - Result; Locating a Drive; Syntaxdescription; Stopping a Locate Operation

Description
Sets the specified virtual drive as the boot drive. During the next reboot, the BIOS looks for a boot sector
in the specified virtual drive.
Result
Controller = 0
Status = Success
Description = None
Detailed Status :
===============
----------------------------------------------
VD Property Value Status ErrCd ErrMsg
----------------------------------------------
13 Boot Drive On Success 0 -
----------------------------------------------
Locating A Drive
Syntax
perccli /c0/e32/s0 start locate
Description
Locates a drive and activates the physical disk activity LED.
Result
Controller = 0
Status = Success
Description = Start Drive Locate Succeeded
Stopping A locate Operation
Syntax
perccli /c0/e32/s0 stop locate
Description
Stops a drive locate operation and deactivates the physical disk activity LED.
Result
Controller = 0
Status = Success
Description = Stop Drive Locate Succeeded
96