Dell PowerEdge M1000e - Rack View; Figure 45. M1000 E Strain Relief Bar and Cable Enumerator Clip (12 Per Kit); Figure 46. M1000 E Mounted in the Rack

Dell
PowerEdge M1000e Technical Guide 55
Figure 45. M1000e Strain Relief Bar and Cable Enumerator Clip (12 Per Kit)
12.4 Rack View
The M1000e is installed on the rails by simply resting the back of the system on the rail ledges,
pushing the system forward until it fully seats, and tightening the thumbscrews on the chassis front
panel.
Figure 46. M1000e Mounted in the Rack
The strain relief bar and cable enumerator clips can be used to help manage and secure the power
cords and I/O cables exiting the back of the system as indicated below.