Dell PowerEdge M520 - Page 137

Error Code Message Information
2. Re-seat the mezzanine card.
3. If the issue persists, see Getting Help.
VLT0232
Message The mezzanine card < number > < name > voltage is greater than the
upper warning threshold.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see Getting Help.
VLT0233
Message The mezzanine card < number > < name > voltage is greater than the
upper critical threshold.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see Getting Help.
VLT0234
Message The mezzanine card < number > < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see Getting Help.
137