Dell PowerEdge M520 - Page 90

Error Code Message Information
Details The IOM module performance may be impacted.
Action If the issue persists, see Getting Help.
HWC6000
Message The < name > controller is offline.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help.
HWC6002
Message The < name > controller is stuck in boot mode.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help.
HWC6003
Message The < name > controller is booting.
HWC6004
Message Cannot communicate with < name > controller.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help.
HWC7002
Message Server < number > health changed to a warning state from a normal
state.
Details Server < number > health changed to a warning state from a normal
state.
Action Review System Log or front panel for additional information.
HWC7004
Message Server < number > health changed to a critical state from either a
normal or warning state.
Details Server < number > health changed to a warning state from a normal
state.
Action Review System Log or front panel for additional information.
HWC7006
Message Server < number > health changed to a nonrecoverable state from a
less severe state.
Details Server < number > health changed to a warning state from a normal
state.
90