Dell PowerEdge M520 - Page 93

Error Code Message Information
MEM0010
Message Memory device at location < location > is over heating.
LCD Message Memory device < location > is over heating. Check fans.
Details System performance is degraded.
Action If unexpected, review system logs for power or thermal exceptions.
MEM0022
Message Memory device at location < location > is absent.
Details The memory may not be seated correctly, misconfigured, or has
failed. Memory size is reduced.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM0701
Message Correctable memory error rate exceeded for < location >.
Details The memory may not be operational. This an early indicator of a
possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM0702
Message Correctable memory error rate exceeded for < location >.
LCD Message Correctable memory error rate exceeded for < location >. Re-seat
memory.
Details The memory may not be operational. This an early indicator of a
possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM1001
Message Memory device at location < location > failed to transition to a running
state.
LCD Message Memory device < location > failed to transition to a running state. Re-
seat memory
Details The memory may not be operational. This an early indicator of a
possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
MEM1003
Message Memory device at location < location > failed to transition to in test.
Details The memory may not be operational. This an early indicator of a
possible future uncorrectable error.
Action Re-seat the memory modules. If the issue persists, see Getting Help.
93